.png)
Celto Acoustique T2.40 Power Amplifier
Description
Oversized PULSAR Push-Pull Switch Mode Power Supply
TrueSound Class D with High-Speed High Current MOSFETs
Studio quality preamp with TrueRMS VCA limiters
MCU Controlled 3D-Guard SOM [Smart Overheat Management]
SuperCharged 105° C long-life capacitors
FEM optimized R:Cool radial heat sinks
Simple layout and assembly for easy servicing
Genuine parts exclusively provided by world class suppliers
Compact and Lightweight 2U Touring grade format
Specifications
| Max output Power EIA 1kHz 1% THD (EIA = 33ms ON / 66ms OFF): | 2 x 2500W 8 ohms 2 x 4000W 4 ohms 2 x 4000W 2 ohms (not recommended) |
|---|---|
| Overall gain: | 34dB (50 times voltage) |
| Sensitivity at 8 ohms: | 2.82Vrms (+11.0dBu) |
| Signal to Noise Ratio (A weighted, 0dB): | 115dB |
| Frequency Response (-1dB): | 20~25000Hz |
| Typical THD (half power, 1kHz, 8 ohms): | <0.05% |
| Typical IMD (1kHz at 4:1, -20dB): | <0.2% |
| Crosstalk (1kHz): | >75dB |
| Slew Rate: | >60V/us |
| Input Impedance: | 20 kΩ |
| Damping factor (1kHz, 8 ohms): | >800 |
| Protection: | Soft-Start, Short-Circuit, Over and Under-Voltage, Over-Current, Over-Load, DC Output, Temperature, SOM (Smart Overhead Management) |
| Operating Voltage: | 190~250VAC 50-60Hz |
| Preamp: | Proprietary PureSound Circuit for unmatched sound quality (Audiophile capacitors in signal path, High Voltage Opamps, Ultra Low Noise design) Studio grade TrueRMS VCA limiter Continuous protection, RF protection, Overload protection |
| Power Supply (PSU): | Advanced Switch Mode with 3D-Guard tracking, 105C long life SuperCharged Capacitors |
| Output stage: | Fully Discrete 4th generation proprietary Class D (93% efficiency at full power), Differential circuit for Load-Independent linear frequency response, Half bridge design with high-Speed high-Current MOSFETs, 105C Long Life capacitors |
| Cooling: | Front to back airflow Temperature regulated SUNON MagLev fans (50000 Hours, dustproof) FEA optimized Radial heat-sink for maximum heat transfer |
| Rear Panel: | 2 NEUTRIK XLR Input with latch 2 NEUTRIK XLR Link 2 NEUTRIK Speakon NL4 PowerCon 20A (included) |
| Speakon Wiring: | SPK1 = 1+1- CH A / 2+2- CH B SPK2 = 1+1- CH B / 2+2- Not Used |
| Net Weight: | 13Kg |
| Gross Weight: | 16Kg |